عرض العمل هذا غير متوفر في بلدك.
Senior Production Engineer(Piping)
NakilatQatarمنذ يوم 1
الوصف الوظيفيForeman / Supervisor The Senior Production Engineer (Lead project represented for piping section) for the piping workstream reports to the Piping Manager, and holds the responsibility to lead more than one vessel concurrently for normal refit works. It is expected the Senior Engineer understands full piping scope & system and its repair, refit, retrofit and newbuild coordinates with clients, engineering, procurement, quality and planning department for project preparation and planning. Coordinates for OFE (Owner Finished Equipment) and YFE (Yard Finished Equipment) for delivery dates which is related for projects. Controls execution of all piping works onboard vessel such as installation, repair, modification, new routing etc. Conducting daily project meeting with the own team to meet the schedule. Monitoring & controlling the budgeted man‑hours against the plan, including capturing additional billable work (cost control). Monitors and control the budgeted materials against the plan, including capturing additional billable materials (cost control). Coordinates with production workshop & production engineering, to ensure that all fabrication and scope of works meet the plan. Works with the Project Manager to ensure the sequence of piping works fits in with broader work stream schedules. Prepares the work completion forms upon job completion and applies Permit to Work (PTW) system. Ensures work are executed to a high standard to facilitate successful job inspections. Coordinates with other trades to ensure end‑to‑end smooth operations and work completion. Apply a wide knowledge of engineering practices to resolving management challenges related to production to accomplish the production process in the most effective, efficient and most‑economic way. Ensure the integrity of the both on board and workshop activity like cutting, beveling, fit‑up & inspection, welding & brazing, flushing & chemical cleaning, pressure testing etc. Coordinate and follow up with production engineers for the workshop fabrication, welding, pressure testing and chemical cleaning. Responsible to scale and integrate physical, human and financial resources at meet high efficiency levels at the lowest possible cost & in pursuit of continuous further improvement. Monitor the daily manpower / manhour consumption for the projects and report to manager. Monitor the daily manhour consumption for the projects and update to section manager for any discrepancy. Plan and allocate the manpower as per the vessel work scope. Closely monitor the daily manpower allocation (WHA). Addresses additional manpower requirements to the section manager to allocate additional manhours needed. Ensure completion of the project within the agreed timeframe and manhours allocated. Closely monitor the section workforce movement for vacation employees, Validating Ras Laffan Industrial City, Qatar ID passes. Monitoring daily food requests prior to submission for approval. Raise Subcontractor Request for subcon manpower if required. Collect the project / vessel specs from the commercial department and assist Piping Manager to assign the piping engineer for the project. Allocate the manpower for the vessels as per the project work scope. Study blueprints, sketches, drawings, manuals, specifications, or sample part to determine dimensions and tolerances of finished work, sequence of operations, and setup requirements. Review the piping section Work Instructions (WI), Risk Assessment (RA) to cover all the piping activities. Closely follow‑up the project in charges for the vessel documentation (SI / Technical Query Report / Work Completion Form / Lesson learnt & Project Postmortem) after completion of vessels. Foster an engaging culture of safe and productive work through role modelling N‑KOM's values. Prepare fit for purpose work Permits & Risk Assessments for the identification, control and / or mitigation of workplace risk. Review and update the section Risk Assessments / Environmental Aspects & Impacts as per the latest safe practice and get approval from piping manager. Apply mathematics and statistics to model production systems during decision making process. Design, implement and refine products, services, processes and systems taking in consideration any constraints and local nuances whether supplier, buyer, substitutes, or new emerging information. Apply appropriate knowledge in order to design, redesign or improve product & service functionality. Drive and implement process improvements to reduce assembly hours and build cost. Apply concepts and quality techniques throughout the entire production process & system and deploy organizational standards for control proceedings and auditing. Stay up to date with technological developments, enabling them to enterprises and society. Manage and optimize flow (information and production flow). Apply knowledge to application of castings, machining processing, joining processes, metal cutting & tool design, metrology, machine tools, machining systems, automation, jigs and fixtures, die and mold design, machine designing and manufacturing etc. Achievement Oriented Collaboration & Teamwork Customer Centricity Drive Vision Empower & Nurture Talent Interactive Communication Solution Oriented Productivity - Set & drive KPI Safety - foster zero harm culture Quality - implement zero reword principles Cost - reduced rework and enable timely delivery As per TOFA. A Diploma or a Degree in Naval Architecture, Marine Engineering, Mechanical Engineering Certificate of Competency (Marine Engineer Officer) Class 1 (Motorship), or its equivalent. At least 5 years’ relevant working experience for Degree Holders and at least 5 years of experience for Diploma Holders (at least 5 years of experience as supervisory role). Drive Vision Interactive Communication Customer Centricity Solution Oriented Empower & Nurture Talents Collaboration & Teamwork Achievement Oriented Isometric Drawing Interpretation Skill Piping and Instrumentation Diagram (P&ID) Drawing Interpretation Skill General Arrangement (GA) Drawing Interpretation Skill Knowledge of the Marine Piping System Knowledge of material standards such as American Society for Testing and Materials (ASTM), American National Standards Institute (ANSI), Japanese Industrial Standards (JIS), American Society of Mechanical Engineers (ASME), American Petroleum Institute (API), etc. Knowledge of lifting gears Knowledge of mode of transportation and lifting equipment’s Knowledge of the heavy lifting, logistics and transportation Software Knowledge in Auto cad Software Knowledge in Bentley Drawing skill for International Organization for Standardization (ISO) and General Arrangement (GA) Knowledge of Drawing symbols.
Reporting Structure
Reports To
- Piping Manager
Direct Reports
Job Summary and Purpose
As a Subject Matter Expert (SME), the Senior Production Engineer (Dedicate Overall In-charge for Special Project) provides the technical & technological problem‑solving ability of production engineering process and planning abilities in order to lead the entire project piping workstream of a vessel or Offshore and control production process installation, repair, modification or new routing of piping systems and their components. Work is executed to a high quality & auditable standard that is consistent with contract work scope, statutory & code requirements, Integrated Management System (IMS) procedures, design parameters, site survey input, Welding Procedure Specification (WPS), stress inputs and vendor data. This job, and subordinates, are performing final pipe install, modification, repair, routing activities onboard a project environment. Reporting to the main piping manager but providing service for the Project Manager & understands full piping scope, system and process.
Accountabilities
Key Accountabilities :
Competencies
Key Result Areas
Interactions and Working Relations
Internal : Piping Section & All Sections in NKOM
Purpose : To Educate Pipe Shop Team towards Safety, Health, Environment, Quality & Security. To implement SHEQS Requirements within Pipe Shop Team. To Educate Pipe Shop Team about IMS. To Supervise & Perform the Assigned works to Pipe Shop Team.
External : Clients, Sub‑Contractors, Service Engineers & Surveyors.
Purpose : To understand client requirements, update job status. To understand the Sub contractors / Service engineer requirements and to arrange accordingly. For inspection of Piping Items.
Financial Authorities
Qualifications, Experience and Job Skills
Qualifications :
Experience :
Job Specific Competencies
i. Behavioral
ii. Technical
#J-18808-Ljbffr
إنشاء تنبيه وظيفي لهذا البحث
Senior • Qatar
وظائف ذات صلة
%20FZE)
- عَرْضٌ مُرَوَّجٌ له
Senior Piping Engineer
John Wood Group PLCDoha, Ad-Dawhah, Qatar Remarkable people, trusted by clients to design and advance the world.Projects team focusing on delivering across EPC, PMC, FEED, Pre-FEED, Concept and Feasibility scopes of work.In this role, you ...أظهر المزيدآخر تحديث: منذ أكثر من 30 يومًا
- عَرْضٌ مُرَوَّجٌ له
Senior Piping Engineer
WoodDoha, Ad-Dawhah, Qatar Remarkable people, trusted by clients to design and advance the world.Wood is recruiting for a Senior Piping Engineer to join its Projects team focusing on delivering across EPC, PMC, FEED, Pre-FEE...أظهر المزيدآخر تحديث: منذ أكثر من 30 يومًا
- عَرْضٌ مُرَوَّجٌ له
Senior Piping Engineer
EHIFDoha, Ad-Dawhah, Qatar Remarkable people, trusted by clients to design and advance the world.Projects team focusing on delivering across EPC, PMC, FEED, Pre-FEED, Concept and Feasibility scopes of work.In this role, you ...أظهر المزيدآخر تحديث: 2 منذ أيام
- عَرْضٌ مُرَوَّجٌ له
SENIOR ENGINEER (PRODUCTION ACCOUNTING)
QatarEnergyMesaieed, Ad-Dawhah, Qatar Senior Engineer (Production Accounting).Join to apply for the Senior Engineer (Production Accounting) role at QatarEnergy.
To develop, implement and maintain a database of the refinery wide Material...أظهر المزيدآخر تحديث: منذ يوم واحد
- عَرْضٌ مُرَوَّجٌ له
Senior Production Engineer (Well)
Petro Staff InternationalDoha, Qatar Job Scope Develop Upstream Integrated Gas Volume and Activities plan (UGP / IAP), review gas production, water injection plans and surveillance ensuring uninterrupted feed-gas delivery from wells and...أظهر المزيدآخر تحديث: منذ أكثر من 30 يومًا
- عَرْضٌ مُرَوَّجٌ له
- جديد!
Construction Lead (Piping)
NES FircroftDoha, Qatar Job Specification Lead and manage Compression EPC Contractor for safe and successful execution of CP Topsides piping fabrication scopes to meet overall project objectives by ensuring HSE, Quality, ...أظهر المزيدآخر تحديث: 8 منذ ساعات
- عَرْضٌ مُرَوَّجٌ له
SENIOR PRODUCTION ENGINEER
Petro Staff InternationalDoha, Qatar Qualifications • Bachelor’s degree in Petroleum Engineering or equivalent.Knowledge / Experience • 8 years' experience in subsurface area, well production, optimization and completions in the oil a...أظهر المزيدآخر تحديث: منذ أكثر من 30 يومًا
- عَرْضٌ مُرَوَّجٌ له
Senior Piping Designer
Worley ParsonsDoha, Ad-Dawhah, Qatar Worley is a global professional services company of energy, chemicals and resources experts.We partner with customers to deliver projects and create value over the life of their assets.We’re bridgi...أظهر المزيدآخر تحديث: منذ يوم واحد
- عَرْضٌ مُرَوَّجٌ له
SENIOR ENGINEER (PRODUCTION ACCOUNTING)
Qatar EnergyAl Wakra, Al Wakra, Qatar To develop, implement and maintain a database of the refinery wide Material Balance by collecting, analysing, validating, investigating, reconciling and reporting ALL flows of feedstock and refined...أظهر المزيدآخر تحديث: منذ أكثر من 30 يومًا
- عَرْضٌ مُرَوَّجٌ له
Senior Piping Engineer
WorleyDoha, Ad-Dawhah, Qatar Continue with Google Continue with Google.We’re a global team of data scientists, consultants, construction workers and innovators all working to create a better tomorrow.Every day, we help custome...أظهر المزيدآخر تحديث: منذ أكثر من 30 يومًا
- عَرْضٌ مُرَوَّجٌ له
Senior Piping Engineer
WorleyParsonsDoha, Ad-Dawhah, Qatar Job Description - Senior Piping Engineer (DOH01JE) : .Ensures team members adhere to generally accepted engineering and design practices, regulatory requirements, and customer specifications.Supports...أظهر المزيدآخر تحديث: منذ أكثر من 30 يومًا
- عَرْضٌ مُرَوَّجٌ له
Production Engineer - Piping (QFAB)
NakilatDoha, Ad-Dawhah, Qatar Job Title : Production Engineer - Piping.Reports To : Operation Engineering Manager.Prepare Fab ISO insurance plan.Issue spool fabrication forecast based on drawing and material ETA.Workouts the proj...أظهر المزيدآخر تحديث: 24 منذ أيام
- عَرْضٌ مُرَوَّجٌ له
Senior Production Engineer
Qatar Energy LNGDoha, Ad-Dawhah, Qatar Develop Upstream Integrated Gas Volume and Activities plan (UGP / IAP), review gas production, water injection plans and surveillance ensuring uninterrupted feed-gas delivery from wells and reservoir...أظهر المزيدآخر تحديث: منذ أكثر من 30 يومًا
- عَرْضٌ مُرَوَّجٌ له
Senior Piping Engineer
Bounty Hunter WorldDoha, Ad-Dawhah, Qatar Candidates must have a minimum of 15 years of experience in the oil and gas onshore / offshore industry, both brownfield and greenfield, that includes a minimum of facilities design (front-end, conce...أظهر المزيدآخر تحديث: 15 منذ أيام
- عَرْضٌ مُرَوَّجٌ له
Piping Engineer M / F
Energy Job SearchAl Wakrah, Ad-Dawhah, Qatar Get AI-powered advice on this job and more exclusive features.We currently have an opportunity within SPIE Oil & Gas Services Qatar LLC.
Be fully aware of the Project HSE requirements.Lead the Pipin...أظهر المزيدآخر تحديث: منذ أكثر من 30 يومًا
- عَرْضٌ مُرَوَّجٌ له
Piping Engineering Lead
Air Products (Middle East) FZEDoha, Ad-Dawhah, Qatar Proficient in piping design principles, international standards (ASME 31.Skilled in PDMS, E3D, CAESAR II for 3D modeling and stress analysis.
Strong leadership and team coordination capabilities.Com...أظهر المزيدآخر تحديث: منذ أكثر من 30 يومًا
- عَرْضٌ مُرَوَّجٌ له
Principal Piping Engineer
WorleyParsonsDoha, Ad-Dawhah, Qatar Job Description - Principal Piping Engineer (DOH01L7).Principal Piping Engineer - DOH01L7.Worley is a global professional services company of energy, chemicals and resources experts.We partner with...أظهر المزيدآخر تحديث: 17 منذ أيام
- عَرْضٌ مُرَوَّجٌ له
Senior Designer (Piping)
Bounty Hunter WorldDoha, Ad-Dawhah, Qatar Candidates must have a minimum of 10 years of detailed design engineering experience in brownfield modifications to oil and gas or similar facilities, which must include offshore experience with Sh...أظهر المزيدآخر تحديث: 15 منذ أيام