Senior QA / QC Engineer in Doha, Qatar

Energy Jobline is the largest and fastest growing global Energy Job Board and Energy Hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.

We focus on the Oil & Gas, Renewables, Engineering, Power, and Nuclear markets as well as emerging technologies in EV, Battery, and Fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.

Note : This is regarding a long term contract, 3 to 4 years

Note : Due to Visa limitations, your application will not be accepted if you are from Iran, Iraq, Sudan, Egypt, Israel, Congo, Afghanistan, Libya. Exception, if you are already an inside Qatar resident with a valid QID, transfer of sponsorship is possible! If you have a valid QID and are in Qatar, press 'NO' when asked for it.

mselect is looking to hire a Senior QA / QC Engineer for a oil and gas operator in Doha, Qatar . Candidates must have a minimum of 15 years of QA / QC relevant experience on major Infrastructure & Civil and / or Oil & Gas Projects. Fluency in English is a must.

Key Responsibilities

• Led the development of departmental QMS & Project QMS requirements by Corporate, VP, Departmental and Project requirements. Led project QA / QC team in the identification and development of all project's operational QA / QC requirements. Enforce project performance and quality objectives at all stages to ensure smooth project delivery.
• Verify / Ensure compliance to Quality Management System by the department and project divisions, conduct MRMs and provide oversight on compliance. Perform various activities related to QMS Certification. Coordinate, monitor, follow-up, and report to senior management on the outcome of various audits performed and corrective and preventive actions there-of at Departmental and Project level. Guide departmental staff and Project divisions and ensure that QMS is implemented, and the Certifications requirements are complied with. Monitor Contractor to ensure compliance to Project Quality Requirements.
• Endorse the project division’s established QA / QC organization for projects. Ensure that the required QA / QC organization of the Contractors is established and adhered to throughout the Project Life Cycle. Review the Scope of Work (SOW) and ensure that Corporate and Project quality and technical requirements are incorporated. Prepare and guide preparation of Project Quality Plan (PQP) by project teams and endorse PQP’s.
• Guide pre-qualification of Contractors / Sub-Contractors and Vendors, as required, and enforce compliance to ISO 9001 and requirements. Provide oversight during technical bid-evaluation of the Bidders to ensure that corporate quality requirements are included, addressed, and understood. If requested, and when required by the project, participate as a member in the Bid Evaluation and Bid-clarification meetings with the bidders.
• Identify and review higher level project QMS documents of the Contractor such as Contractor Project Quality Plans, Quality Management for compliance to ISO 9001 and departmental requirements. Endorse Material Criticality ratings, as well as Inspection and Test requirements for critical equipment to ensure that inspection and tests are conducted to meet the critical quality requirements. Manage Project Quality reviews / highlights.
• Identify and review critical project engineering deliverables, as required, whilst the relevant project team is not in place, assist projects in review of engineering deliverables for incorporation for quality, inspection and testing requirements and setting up the project quality organization.
• Lead the review of, through VP Directorate specialists, material selection, special process documentation, corrosion, and material substitutions in accordance with project specifications, the certification requirements, the Shell Design and Engineering Practices (DEPs), standards & specifications, international codes and standards, and Contract QA / QC requirements. Participate in review & update of standards, management system procedures. Participate in the tenders technical bid evaluations and provide QA / QC review comments to the evaluation team.
• Ensure deviation control & Non-conformance control system is implemented to meet the departmental compliance requirements. Review and endorse the resolution of deviations related to QA / QC matters, the corrective and preventative action and proper closure of the Non-Conformance Reports (NCRs) / Corrective Action Requests (CAR’s) by Standard. Maintain projects’ CAR’s / NCR’s registers and prepare departmental quality reports, including periodical reports on CAR’s / NCR’s.
• Participate in Independent Project Reviews (PIRs) / Technical Audits and support in Root Causes Analysis (RCA) and failure analysis exercises when referred.
• Review and provide inputs for preparation of Contractor Performance evaluation reports. When referred, support technical quality issues during project close-out, final documentation compilation and warranty claims. Develop the departmental KPIs and data collection. Support the project divisions to develop divisional KPIs and facilitate periodic review of KPIs.
• Implementing the elements of the management system applicable to the relevant function.
• Take care of your safety and the safety of others who may be affected by business, whether the activity is under your direct control, and proactively participate in all safety matters affecting the construction of the project.
• Preventing pollution to the environment, either by you or by others in the project.
• Implement quality inspection procedures on construction activities, suppliers, and sub-contractors to ensure compliance with project specification.
• Ensure that the documentation generated by the inspections, tests, surveillance, and surveys meet the requirements of the Project Quality Plan (PQP), ITPs, and project requirement.
• Review of contractor / subcontractor / supplier / TPIA quality documentation and reports.
• Complete relevant forms and prepare reports on inspections and tests undertaken for in, and maintenance of, inspection records.
• Communicating effectively with the contractor, third parties and end users at your level.
• Ensuring that all equipment used for measuring and testing is in calibration and such records are available.
• Assisting construction personnel to develop the required quality documentation, including method statements, work procedures, inspection and test plans and inspection and test records.
• Assisting construction personnel to identify problems and potential or actual non-conformances and to assist in proposing correction and corrective actions.
• Liaise with other Field Supervisors and contractors to be aware of planned and completed construction works to ensure civil / structural tests are planned and performed.
• Review and comment on quality documents on PDMS such as material submittal, Quality plan, project specification and test results, concrete casting, steel fixing, anchor bolts, grouting, steel structure erection, block works, soil & excavation, and material-receiving activities.
• Ensure all civil, structural, and architectural activities are performed according to project requirements and that tests and reports are prepared, approved and included in documentation packages.
• Monitor all materials and equipment are used in accordance with specifications.
• Review & approve corrections, and preventive & corrective actions to close out non-conformances.
• Monitor trends of non-compliance to requirements and feedback on the status of contractor’s performance.
• Issue Surveillance / NCRs / CARs for Senior QA / QC Engineer’s approval.
• Conduct Quality Audits for contractors, sub-contractors, suppliers, and Third-party Laboratories.

Decision Making Authority

Context / Special Features / Challenges

Requirements

#J-18808-Ljbffr