Senior Instrumentation & Control Inspector

JOB DESCRIPTION Company Profile Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries.

Duties And Responsibilities Purpose Perform all activities necessary for Instrumentation & Control Inspection.

Functions

Discipline Inspectors Instrumentation Inspection shall include (but not be limited to)

Control Center including

Storage of received equipment

Installation of panel board, console, rack, etc.

Control center wiring

Testing (continuity, insulation resistance, etc.)

Instrument Pressure Lines including

Visual inspection of tag numbers, dip high and low pressure, slope, support, material & rating, purging requirements,

Pressure & leak tests.

Wiring including

Cable identification & tag no.

Installation

Cable gland and sealing

Line-line and line-ground resistance

Testing (continuity, insulation resistance, etc.)

Signal lines including

Inspection of materials

Installation of tubing, fitting, valves)

Witness air blow

Leak tests

Continuity tests.

Loop Tests including

Input / output signal loops.

Calibration of instruments including all digital and analog instruments, control valves either pre-installed or instruments installed at site.

Installation of instruments including (18) verification of correct instruments, stands, etc.

Review Disciplines' Quality Control Documentation for Completeness

Safety Ensure that the Safety policies and procedures are understood and adhered to so far as is reasonably practicable in order to ensure a safe working environment.

Other Carry out work in accordance with the Company Health, Safety, Environmental and Quality Systems.

Perform the assigned tasks with due diligence regarding the Integrated Management Systems on the Company.

Eliminate waste of whatever form, to suggest the use of more environmentally friendly substances and practices and contribute to the continuous improvement of the environment.

Supervisory Responsibilities This position has NO direct supervisory responsibilities.

Reporting Relationship

Reports to Project Manager (PM) as line manager. Project Coordinator will support PM on issuing instructions or communications to employee.

Daily contact and technical reporting to site client contact or client Quality Team representatives.

Employee shall report the results of all vendor and construction site inspections on a weekly basis or more frequently as advised by client for a specific task. Inspection reports shall clearly show the items / activities inspected, inspection status, acceptance criteria, and follow-up action as necessary. Inspection reports shall be in a paper or electronic format as agreed to by client.

Computer Skills To perform this job successfully, an individual should have complete knowledge of Microsoft Office.

Knowledge, Skills, Abilities, and Other Characteristics

Ensures that important information from management is shared with employees and others as appropriate

Gives and receives constructive feedback.

Ensures that others involved in a project or effort are kept informed about developments and plans

Ensures that regular consistent communication takes place within area of responsibility

Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and / or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

ESSENTIAL

Degree or Trade Certification

Code knowledge : API-550, API-14C.

DESIRED

15 years’ experience in Instrumentation & Control inspection in the oil and gas industry.

Education and / or Experience Minimum of 10 years’ experience in Instrumentation and Control Inspection in Oil and Gas Industry.

Working Conditions This position is considered ONSHORE FIELD WORK which is characterized as follows :

Outdoors working on work site, day or night. Indoor office for reporting.

Work sites can be warehouse, yard, vendor shop, construction site, industrial city

Requires working on or near oil and gas plant equipment, pumps, skids, modules

During summer season humidity is above 90%. Noise can be over 85 decibels and the light is intense / glare.

Potential exposure to open fire / flames / sparks / gases on adjacent work parties

Potential exposure to airborne dust, fumes at work site

Work surface is stable, height is elevated. Use of ladders and scaffold for some access.

Confined space required but infrequent

Working outside for extended periods of time in temperatures as high as 49°C.

Physical Activity / Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

This position is considered MEDIUM work.

#J-18808-Ljbffr