Calibration Technician

Taleb Group in Doha Qatar is now hiring for Calibration Technician positions Requirements Experience in the calibration field minimum 3 years Oven Weight balance weighing Bridge Length Batching plant RM Load cells Feller Guage Diploma in Metrology or any relevant qualifications Salary QAR 18002000 based on qualification and experience Responsibility To receive the instruments for calibration from the customers To check the physical condition of instruments as well as functioning of instrument To verify the qty and type of instruments received against customer delivery note memo if any To prepare Calibration Service Request cum Instrument Receipt Challan To issue copy of Calibration service request cum instrument receipt challan to the customer for acknowledgement of receipt of their instruments To paste masking tape on instrument along with the details of Calibration service request inward No Job No Serial no of particular instrument in the inward To place the instruments at the identified area such as Instrument received for Calibration To clean the instruments before calibration To clean the instruments with petrol and cotton waste in case of mechanical instruments To keep instrument in the calibration standard room at least for 30 minutes for soaking To bring instrument in the equilibrium condition of the standard room To start calibration of instruments as per the documented calibration method based on the priority of the calibration To ensure that the calibration methods are available where calibration activities are performed To record the results of calibration in the observation sheet To complete the calibration and to get review and approval of results recorded in the observation sheet from the Technical Manager To calculate uncertainty of measurement for the instruments calibrated as requested by the customer To enter the data of the observation sheet in the computer and prepare calibration certificate To get review and approval of the calibration certificate through Technical Manager Chief Executive Officer To collect photocopies of master s calibration certificate used for the performing of calibration To attach photocopies of calibration certificates of master along with the calibration certificates and to place all such things in the cover To place instrument at the identified place in the calibration room after completion of calibration To deliver the instruments along with the calibration certificate to the customer To ensure that the proper records are maintained at all stages of calibration and quality assurance activities To prepare daily records of the mechanical electrical thermal discipline To handle the instruments throughout the calibration activities in safe and proper manner To monitor the accommodation and environment parameters Such as Temperature humidity noise illumination electrical supply earthing resistance regularly and to maintain records for the same To analyse the relevant records and to provide feedback to the Technical Manager against the customer complaint if any To do re calibration of the instruments as per the Quality assurance schedule To do calibration of the instrument selected for the interlaboratory comparison and to submit the results of calibration to the Technical Manager To prepare uncertainty budget for all calibration parameters and to ensure that the same is used periodically for uncertainty of measurement To identify the requirements for consumable purchase and forward it to Technical Manager To help Technical Manager on daytoday activities To report to the Technical Manager on daytoday functioning To use available resources in an optimum basis To reduce wastage of available resources Authority To stop the calibration activities if proper environment condition is not maintained achieved To take corrective and preventive actions identified based on analysis related to the customer complaint or results of calibration Application Interested Candidates should send their latest Resume CV with their working history and Education background