Welding Engineer
MPH GlobalDoha, Doha, Qatar20 hours ago
Job descriptionTo promote & comply with applicable safety instructions and other COMPANY HSE procedures in all activities. To carry out work in compliance with COMPANY values and policies, relevant laws and regulations, agreed COMPANY priorities and objectives, COMPANY standards and procedures and good industry practices. To treat all information obtained during course of the work with confidentiality. To write Welding Project Particular specifications In case of LLI purchased by the client / MP, to write the technical RFQ for Material and Welding Scope of Work To review and validate the Welding matrices, Welding Procedure Specifications, Welding Procedure Qualification Records, Welding Book, Production Tests, Heat Treatment process. To participate in the different Contractors and Critical Vendors Kick Of Meetings and Pre-Inspection Meetings. To be involved in the Surveillance and Inspection activities. Witness welding qualifications, welders qualification and test laboratory, as required. To assess performance of dedicated personnel for welding. To review and validate the Non Destructive Testing Procedures and method statement guidelines. To review / approve Welding and Material documentation using company EDMS To promote Quality in the Projects and provide Quality and Technical advices. To participate in the resolutions of the Technical Queries, Deviations Requests, NCRs and Concessions Requests. To lead investigations of significant Quality failures. To lead or participate on qualification / assessment / technical audits over Suppliers (LLI), Contractors, and Vendors. To provide weekly & monthly status reports including KPI's to Head Projects QA / QC on welding engineering, metallurgy, and non-destructive testing. To participate in the Project Close Out. To issue any lesson learnt, Quality Feed Back Notice or Feedbacks affecting Welding, Metallurgy and Non Destructive Testing.
We are looking for a Welding Engineer for one of our clients with the following details :
Start date : Dec 2025
End Date : Dec 2027
Location : Doha, Qatar
Work status : ONSHORE, residential- Single status
Qualification and Experience required :
- Qualification : Master's degree in welding - ESSA / IWE / EWE certifications also required.
- Professional Experience (number of years) : 15 in a similar position.
- Experience within project : (number of years) : 10 years of experience associated with topsides fabrication and subsea pipelines laying, including automatic welding process.
- Confident in ECA and associated testing
- Comprehensive knowledge in welding, material, corrosion (inc SSCC) and NDE.
- Good leadership skills and good communication skills.
- Ability to work on projects in a complex and multicultural environment,
- Be skilled in using computer programs for word processing, database management, spreadsheets and e-mail communications.
- H2S OPITO and T-BOSIET trainings.
Activities :
If you are interested, kindly apply!
Create a job alert for this search
Engineer • Doha, Doha, Qatar
Related jobs
Should have 3-5 years of experience as a 6G Welder.Valid 6G welding certification (ASME Section IX or equivalent) for GTAW and SMAW.
Familiarity with PQR, WPS, and welding log documentation.Interest...Show moreLast updated: 21 days ago
This position is based in Ireland.Joins metal parts using various welding techniques (e.Arc, MIG, TIG, Flux-Cored) to construct or repair structures, pipelines, machinery, or other metal products.R...Show moreLast updated: 30+ days ago
The job holder will be responsible for the following activities during project execution within the Major Projects Division : .
Provide welding engineering, metallurgy, and non-destructive testing exp...Show moreLast updated: 1 day ago
Read and interpret technical drawings, welding symbols, and project specifications.Prepare and align joints, control heat input, and ensure weld quality.
Perform visual and dimensional inspections d...Show moreLast updated: 14 days ago
Interpret blueprints, technical drawings, and welding procedures.Set up and operate welding equipment (MIG, TIG, Stick, ARC, etc.
Weld components in flat, vertical, or overhead positions as required...Show moreLast updated: 26 days ago 
6G Welder (GTAW + SMAW – SS & Alloy)
Madre Integrated EngineeringDoha, RA, qaQuick Apply
Welder
RecruitrooDoha, Doha Municipality, QAQuick Apply
- Promoted
Welder
Flip retailDoha, Qatar Urgently Required Welder for a leading Woodworking Workshop in Qatar.Must have understanding of dimensions, reductions, as well as welding.
Need to have expertise in finishing after welding.Understa...Show moreLast updated: 30+ days ago
Welding Engineer
Fusion Outsourcing and ServicesDoha, DA, qaQuick Apply
- Promoted
Welder
Cross rail construction companyDoha, Qatar Clay Construction Group have opening for the post of Senior Civil Engineer.Job description is as follows below; Assisting with site investigations Assessing the worth and potential risks of project...Show moreLast updated: 30+ days ago
- Promoted
Welding Engineer - Subsea
Orion Engineering Services LimitedAl Daayen, Al Daayen, Qatar We have a current opportunity for a Welding Engineer - Offshore on a contract basis.The position will be based in Doha.For further information about this position please apply.To promote & comp...Show moreLast updated: 2 days ago
- Promoted
Welding Engineer - Subsea
Orion GroupAl Sheehaniya, Al Sheehaniya, Qatar We have a current opportunity for a Welding Engineer - Offshore on a contract basis.The position will be based in Doha.For further information about this position please apply.To promote & comply w...Show moreLast updated: 1 day ago
- Promoted
Senior Piping / Welding Inspector - Offshore -28 / 28 Rotational
SGSDoha, Doha, Qatar SGS is the world's leading inspection, verification, testing and certification company.We are recognized as the global benchmark for quality and integrity.
With more than 99,600 employees, we operat...Show moreLast updated: 1 day ago
- Promoted
3G / 4G FCAW welders – IACS certified
Madre Integrated EngineeringDoha, Qatar Job Description Responsibilities.Carry out FCAW welding in 3G and 4G positions on structural steel, hulls, and ship components as per project requirements.
Read, interpret, and follow engineering dr...Show moreLast updated: 25 days ago
- Promoted
Welder
Baker HughesDoha, Ad-Dawhah, Qatar Industry Energy technology part of Baker Hughes Company operates across 120 countries and serves the entire energy value-chain and industrial sector.
We hold an extensive portfolio of rotating equip...Show moreLast updated: 5 days ago
- Promoted
Structural Welding Supervisor (QFAB)
NakilatAl Sheehaniya, Al Sheehaniya, Qatar PREFERENCE WILL BE GIVEN TO QATARI CANDIDATES • •.To co-ordinate and supervise the activities of the foremen and his crew on the project.
Must ensure compliance with HSE, Quality and Ethics policy and...Show moreLast updated: 1 day ago
- Promoted
Steel Structural Welding Inspector - CSWIP certification
Redlink GroupQatar Steel Structural Welding Inspector - CSWIP certification.Diploma or Bachelor's degree in Mechanical Engineering, Metallurgy, or a related field.
Minimum 5 years of experience in steel structural wel...Show moreLast updated: 1 day ago
- Promoted
𝗪𝗲𝗹𝗱𝗶𝗻𝗴 𝗘𝗻𝗴𝗶𝗻𝗲𝗲𝗿
Groupe GISMICDoha, Doha, Qatar 𝗤𝗨𝗔𝗟𝗜𝗙𝗜𝗖𝗔𝗧𝗜𝗢𝗡𝗦 & 𝗘𝗫𝗣𝗘𝗥𝗜𝗘𝗡𝗖𝗘 𝗥𝗘𝗤𝗨𝗜𝗥𝗘𝗗 : .Qualification : Master’s degree in welding - ESSA / IWE / EWE certifications also required.
Professional Experience (number o...Show moreLast updated: 1 day ago
Super Duplex Welder
Premium Solutions ConsultancyDoha, Doha Municipality, QAQuick Apply
- Promoted
Welding Inspector
Tüv RheinlandAl Sheehaniya, Al Sheehaniya, Qatar This is an excellent opportunity to be part of one of Qatar's landmark energy expansion initiatives.BE / Diploma in Mechanical Engineering.
ASNT Level II in RT, UT, MT & PT.Minimum 8-10 years in rel...Show moreLast updated: 1 day ago
- Promoted
Welding Engineer
Integrated Personnel Services Limited Hiring For Reputed Co in QatarDoha, Qatar We have urgent requirement for the post of.QC Welding Engineer for Reputed Company in.Qatar Requirements Education : Degree in Mechanical Engineering.
Experience : Minimum 8 Years IWE Certified or CSW...Show moreLast updated: 30+ days ago
Welder
Madre Integrated EngineeringDoha, DA, qaQuick Apply
- Promoted
Senior Sales Engineer
Castolin EutecticUmm Salal Mu?ammad, Qatar Sales & Marketing support for Maintenance and Repair Products, Wear Parts, VRM, Welding & Coating services, etc.Develop customer base and generate new applications to increase sales Manage all sale...Show moreLast updated: 30+ days ago