BAE Systems Strategic Aerospace Services WLLMesaieed, Ad-Dawhah, Qatar
منذ أكثر من 30 يومًا
الوصف الوظيفي
BAE Systems Strategic Aerospace Services WLL | Full time
Responsibilities :
To monitor and supervise all welding activities within NGL Complex and other BASE LOCATIONs to ensure compliance to QatarEnergy and international codes and standards.
To monitor and supervise all associated non-destructive testing activities.
To produce daily welding activity logs and reports for entry into the Inspection Management System (IMS) support software for SAP or IMMS.
To review and sentence all associated Radiographs and NDT reports.
To highlight areas of concern to QatarEnergy Senior Welding Inspector for rejection report generation.
To produce rough site isometric sketches of pipelines where required highlighting inspection points, problematic locations, extent of scaffold access and insulation removal requirements.
To report to QatarEnergy Senior Welding Inspector.
Candidate shall have the ability to pass QatarEnergy Permit to Work system and Consolidated Permit to Work system.
Requirements
Qualifications :
CSWIP 3.2.2 minimum requirement. Diploma in Mechanical Engineering or Bachelor of Engineering in Mechanical Discipline from a reputed institute.
The candidate shall be able to communicate fluently in English, both verbally and in writing.
The candidate shall be fully familiar with construction drawings, isometric and P. & I.Ds.
The candidate shall be computer literate and familiar with MS Word and Excel. He shall be able to work under own initiative.
The work entails a high percentage time on site.
Experience :
The candidate shall have minimum ten (10) years experience in the oil and gas related business for Diploma holders / five (5) years for Bachelor of Engineering.
He shall have proven experience of in-plant / construction welding inspection on oil / gas process facilities.
The candidate shall be familiar with NDT techniques and valid level- II NDT certificates.
Hold Valid CSWIP 3.2.2 certification for a minimum of three (3) years after certification.
Candidate shall have the ability to pass QATARENERGY Permit to Work system and Consolidated Permit to Work system.
Shall pass PTW or ePTW as specified by Mesaieed Operations Qatar Energy HSE as required.
#J-18808-Ljbffr
إنشاء تنبيه وظيفي لهذا البحث
Welding Inspector • Mesaieed, Ad-Dawhah, Qatar
وظائف ذات صلة
عَرْضٌ مُرَوَّجٌ له
QC Inspector Welding / NDT
Bounty Hunter WorldDoha, Qatar
QC Inspector Welding / NDT (Topside Fabrication and Installation).Candidates must have a minimum of 10 years of relevant experience in the Oil & Gas Downstream Industry with an international consulta...أظهر المزيدآخر تحديث: منذ أكثر من 30 يومًا
عَرْضٌ مُرَوَّجٌ له
جديد!
Welding Engineer
BUTEC S.A.L.Qatar
Lead efforts to apply the API 650 standard in designing, fabricating, and inspecting welded steel storage tanks.Ensure compliance with relevant welding codes including ASME Section IX, AWS D1.Apply...أظهر المزيدآخر تحديث: منذ أقل من ساعة واحدة
عَرْضٌ مُرَوَّجٌ له
Senior Inspector-QA / QC (Welding)
Galfar Al Misnad Engineering and Contracting W.L.L.Doha, Qatar
Overview Senior Inspector-QA / QC (Welding).Galfar Al Misnad Engineering and Contracting W.Approximately 10 years of experience with a minimum of 3 years post-certification in pipeline projects.Senio...أظهر المزيدآخر تحديث: 23 منذ أيام
عَرْضٌ مُرَوَّجٌ له
Welder
Flip retailDoha, Qatar
Urgently Required Welder for a leading Woodworking Workshop in Qatar.Must have understanding of dimensions, reductions, as well as welding.
Need to have expertise in finishing after welding.Understa...أظهر المزيدآخر تحديث: 7 منذ أيام
عَرْضٌ مُرَوَّجٌ له
Structural Welding Supervisor (QFAB)
NakilatDoha, Qatar
Job Title : Structural Welding Supervisor.Functionally Reports To : Construction Superintendent.To co-ordinate and supervise the activities of the foremen and his crew on the project.Must ensure com...أظهر المزيدآخر تحديث: منذ أكثر من 30 يومًا
عَرْضٌ مُرَوَّجٌ له
GENERAL TECHNICIAN (INSPECTION)
Qatar EnergyAl Wakra, Qatar
To perform Independent Visual Inspection and NDT Activities as instructed by Plant.At least 5 years' experience in in-service inspection, shutdown inspection functions within oil refining & petroch...أظهر المزيدآخر تحديث: منذ أكثر من 30 يومًا
عَرْضٌ مُرَوَّجٌ له
Senior Piping & Welding Inspector
SGSDoha, Qatar
SGS is the world’s leading Testing, Inspection and Certification company.We operate a network of over 2,500 laboratories and business facilities across 115 countries, supported by a team of 99,500 ...أظهر المزيدآخر تحديث: 2 منذ أيام
عَرْضٌ مُرَوَّجٌ له
QC Inspector (Piping) - Qatar
Hudson ManpowerDoha, Qatar
We are looking for an experienced.The candidate will ensure all piping installations meet project specifications, international quality standards, and safety requirements.This role offers hands-on ...أظهر المزيدآخر تحديث: 2 منذ أيام
عَرْضٌ مُرَوَّجٌ له
Eager Titanium Welder : Mastering the Art of Titanium Welding
mahadjobs.comAl Rayyan, Qatar
A titanium welder understands titanium's properties and uses the right welding equipment and processes to produce finished components.
They may work in enclosed spaces or operate hand-powered machin...أظهر المزيدآخر تحديث: 22 منذ أيام
عَرْضٌ مُرَوَّجٌ له
Plant QA / QC Inspector
Abroad WorkDoha, Qatar
Plant QA / QC Inspector Vacancy in Doha, Qatar.We at Istep Technology specialize in various sectors across the Gulf Region.
Our services are known for excellence in delivery, ethics, and professional ...أظهر المزيدآخر تحديث: منذ أكثر من 30 يومًا
QC Inspector (Piping) Qatar
Hudson ManpowerDoha, RA, QA
We are looking for an experienced.Oil & Gas project in Qatar.The candidate will ensure all piping installations meet project specifications, international quality standards, and safety requirem...أظهر المزيدآخر تحديث: 8 منذ أيام
عَرْضٌ مُرَوَّجٌ له
Welding Inspector
spectech trading and servicesDoha, Qatar
We are seeking a qualified and experienced.The Welding Inspector will be responsible for ensuring that all welding activities are carried out in compliance with project specifications, applicable c...أظهر المزيدآخر تحديث: 2 منذ أيام
عَرْضٌ مُرَوَّجٌ له
QC Inspector Structural (Brownfield)
Bounty Hunter WorldDoha, Qatar
QC Inspector Structural (Brownfield).Candidates must have a minimum of 10 years of relevant experience in the Oil & Gas Downstream Industry with an international consultancy company.Ensure that the...أظهر المزيدآخر تحديث: منذ أكثر من 30 يومًا
عَرْضٌ مُرَوَّجٌ له
Welding Inspectors – Galfar Al Misnad
Radio OliveDoha, Qatar
Previous Experience with Large Value Piping Projects with Oil & Gas – GCC.Conduct visual inspections of welds to ensure compliance with industry standards and specifications.Duration : Permanent pos...أظهر المزيدآخر تحديث: 22 منذ أيام
عَرْضٌ مُرَوَّجٌ له
Welding Inspector
Swan GlobalDoha, Qatar
Overview The CSWIP Welding Inspector will be responsible for conducting welding inspections during pipeline installation, including fit-up, in-process, and final inspections.The role requires ensur...أظهر المزيدآخر تحديث: 22 منذ أيام
Supervisor-Steel Welder
Madre Integrated EngineeringDoha, WA, qa
Quick Apply
Supervise and monitor daily welding and fabrication activities of steel welders.Allocate work to welders based on project priorities and schedules.
Ensure welding procedures, codes, and standards (A...أظهر المزيدآخر تحديث: 20 منذ أيام
عَرْضٌ مُرَوَّجٌ له
PIPELINE INSPECTOR
Qatar EnergyAl Wakra, Qatar
Undertakes inspection of Pipeline to establish condition.Prepares inspection reports outlining specific recommendations and liaises with maintenance Engineers and field supervisors regarding their ...أظهر المزيدآخر تحديث: منذ أكثر من 30 يومًا
عَرْضٌ مُرَوَّجٌ له
Quality Control Inspector - Welding (QFAB)
NakilatDoha, Qatar
Position : Quality Control Inspector - Welding.Project Quality Control Supervisor.Company : Qatar Fabrication Company.Determine product conformity to customer specification through independent insp...أظهر المزيدآخر تحديث: منذ أكثر من 30 يومًا
SGS is the world’s leading Testing, Inspection and Certification company.We operate a network of over 2,500 laboratories and business facilities across 115 countries, supported by a team of 99,500 ...أظهر المزيدآخر تحديث: 2 منذ أيام
Steel Welder
Madre Integrated EngineeringDoha, WA, qa
Quick Apply
Perform welding of structural steel components using SMAW, FCAW, MIG / MAG, or TIG processes as required.Interpret and follow fabrication drawings, welding symbols, and work instructions.Carry out fi...أظهر المزيدآخر تحديث: 20 منذ أيام